3 point seat belt?
 

Looking to put a 3 point seat belt in my 68 firebird.
I was looking at a set from snappin turtle I saw at English town.swap meet.
My question is has anyone used these and if so how would you go about mounting the top ancor ? I have a new head liner allready installed and dont want to hack it. Any input would be great.
Thanks.:usa2:

can you use the factory mount points?

The bottom ones should work. Not sure where or how to mount the top.

factory shoulder belts used 2 smaller holes about same location as the coat hanger.
if you carefully peel back the lower part of headliner you can see the plate and tapped holes

Thanks for the help.
I'll see if I can find the mounting point under the headliner tonight.

If you haven't already bought them, look at Morris Classic Concepts. I put his 3 pts in all 4 seating positions in my 69 bird. very nice product.

http://forums.maxperformanceinc.com/...d.php?t=703049

Here's a thread about how I installed my 3 pt belts. Pics aren't the greatest, and the interior is still ratty waiting on resto after bodywork is done, but it's enough to get the idea. It might help.

I put the Morris belts in several years ago. I had a picture of the upper mount with my headliner out. Here is the link. Hope it helps
http://forums.maxperformanceinc.com/...d.php?t=435425