PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Street (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=418)
-   -   Valve spring coil bind (https://forums.maxperformanceinc.com/forums/showthread.php?t=713223)

ironman 11-10-2012 09:04 PM
Valve spring coil bind
 
Been buying parts as I find them for a future build. I have a set of Comp 26995 beehive springs that I will install at 1.7 and a set of comp 1.65 roller rockers, I want to run a crower 60311 solid flat tappet cam. I know to check clearances on assembly and I will be doing this just want to make sure that this combination of parts will work and I wont have an issue with coil bind before I order the cam.

Thanks

antique69lemans 02-25-2014 01:15 PM
Quote:
Originally Posted by ironman (Post 4776732)
Been buying parts as I find them for a future build. I have a set of Comp 26995 beehive springs that I will install at 1.7 and a set of comp 1.65 roller rockers, I want to run a crower 60311 solid flat tappet cam. I know to check clearances on assembly and I will be doing this just want to make sure that this combination of parts will work and I wont have an issue with coil bind before I order the cam.

Thanks

Well it has been long enough... any feedback on how well the behive springs work? I would like to use this spring but it seems a little low on pressure for me.


All times are GMT -4. The time now is 03:12 AM.