PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   69-77 Grand Prix TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=435)
-   -   Fuel gauge (https://forums.maxperformanceinc.com/forums/showthread.php?t=758886)

71ModelJ 08-06-2014 09:53 AM

Fuel gauge
 
Does anyone know where to get a new fuel gauge for a 71 grand prix. Also do you have to take the whole dash out to replace it. thank's

Peter Serio 08-07-2014 08:40 AM

Yes the entire padded dash needs to come out. The gauge can come out from the backside of the cluster but first you would have to remove the printed circuit.

I have good used gauges here or if you wanted to send me yours I can rebuild that one for you.

Scott Thelander 08-07-2014 01:20 PM

also
 
I am guessing........ but you have already eliminated a ground issue at the tank and the sending unit as not being the problem....

does the gauge not move ? or read way full ??

trying to save you pain from removing the dash.........

and as a matter of fact I am pulling a 69 J model pad here in the next several days

and can take step by step pics........

its been 25 years since I pulled a 69 sj pad ... I know theres a couple bit?h bolts

can anyone verify the position of these ... seems they wer e near the radio

and how to get to them ??

Scott

Peter Serio 08-08-2014 01:53 PM

It's been a long time but as I recall you had to first remove the driver's side A/C vent outlet and in behind there is a 1/2" hex headed bolt that points to the left.

Also up underneath the radio lower dash to the right there is another brace with the same sized bolt.

71ModelJ 08-21-2014 09:03 PM

Quote:

Originally Posted by Scott Thelander (Post 5249105)
I am guessing........ but you have already eliminated a ground issue at the tank and the sending unit as not being the problem....

does the gauge not move ? or read way full ??

trying to save you pain from removing the dash.........

and as a matter of fact I am pulling a 69 J model pad here in the next several days

and can take step by step pics........

its been 25 years since I pulled a 69 sj pad ... I know theres a couple bit?h bolts

can anyone verify the position of these ... seems they wer e near the radio

and how to get to them ??

Scott

Sorry I didn't get back right away. Vacation needed! But yes replaced sender and made a better ground. Unplug goes to full. Half a tank reads 1/8th. Fuel guage low and high resistance sides. I'm thinking guage. :confused:


All times are GMT -4. The time now is 02:31 PM.