Tech tip on the rear lower control arms.
 

I found out today that if you buy the inserts for the '64-'72 GM A-Body Lower Rear Control Arms, that they also will fit the '82-'02 F-Body. That is what I will do instead of buying a set of control arms. If anything helps with saving money (only got the polyurethane bushings) then that will work for me.

Now, if I only can obtain an insert for the panhard bar.

I just take some flat steel and weld it in from bushing to bushing. Did that back in the very early 90s. Some of the early 82-85/6 cars had that bolt in reinforcement from the factory. But that is a great tip, will add to my melon..

I will try that.
 

On the steel, I will do that. Thanks.