PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   67-81 Firebird & TA Parts WANTED (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=452)
-   -   Looking 1978 trans am metal vacuum line (https://forums.maxperformanceinc.com/forums/showthread.php?t=771634)

machota100 03-23-2015 06:11 PM

Looking 1978 trans am metal vacuum line
 
1 Attachment(s)
The line I'm looking for is the line that goes across the front of passenger side of the engine. It bolts front of the engine and the thermostat housing and looking four blue 4 hose ported vacuum switch. See pic thanks manny Attachment 393584

bowties427 03-26-2015 11:45 PM

Starting at post 241...On the vacuum switch.

http://216.178.81.108/forums/showthr...755425&page=13

http://www.ebay.com/itm/301249077287...%3AMEBIDX%3AIT

Is the line your looking for goes over to the charcoal canister part way then connects via vacuum hose and on the other end connect to the carb. If so I may have one but no promises.

machota100 03-27-2015 05:11 AM

Thanks for the info on the ported vacuum switch. I have a ac delco replacement its white so i was going to attempt to paint it if i couldnt find the right one. That is the line im looking for. If possible can you send a pic if you can locate yours. Thanks

machota100 03-27-2015 05:12 AM

Thanks for the info on the ported vacuum switch. I have a ac delco replacement its white so i was going to attempt to paint it if i couldnt find the right one. That is the line im looking for. If possible can you send a pic if you can locate yours. Thanks

Quote:

Originally Posted by bowties427 (Post 5380114)
Starting at post 241...On the vacuum switch.

http://216.178.81.108/forums/showthr...755425&page=13

http://www.ebay.com/itm/301249077287...%3AMEBIDX%3AIT

Is the line your looking for goes over to the charcoal canister part way then connects via vacuum hose and on the other end connect to the carb. If so I may have one but no promises.


cressy 03-27-2015 08:31 AM

3 Attachment(s)
I have a used switch which I don't know if it works , needs cleaning up.

roundportponchos 03-27-2015 09:44 PM

switch
 
Does it have part number stamped on top?

machota100 03-27-2015 10:05 PM

How much for the switch

cressy 03-28-2015 08:33 AM

1 Attachment(s)
I don't see a part # on top.
I would like $25 for it which includes mailing.

bowties427 03-28-2015 10:17 PM

Quote:

Originally Posted by machota100 (Post 5380149)
Thanks for the info on the ported vacuum switch. I have a ac delco replacement its white so i was going to attempt to paint it if i couldnt find the right one. That is the line im looking for. If possible can you send a pic if you can locate yours. Thanks

Looked on the old parts car today and the line is missing. Its like it didnt have one, it was a vacumm line from the canister up to the carb.

machota100 03-29-2015 02:37 AM

Ok thanks for looking

462-6spd 05-03-2015 12:53 PM

You still looking for these parts, Machota100? I know I have the metal line and pretty sure I have the vacuum switch too. Off a '79 TA 400.

Gary

machota100 05-03-2015 06:38 PM

It took a little time but I found everything. Im looking for a mint set of camel tan seatbelts and a 4 speed center console now.


All times are GMT -4. The time now is 07:51 PM.