Comp Cam Roller, barely used @ Norwalk
 

This roller cam was used on startup and about 100 miles in a new 535 in a car I bought. Needed to switch cams to lower dynamic compression. See specs on Cam Card. Will be at Norwalk. Pm me your phone number if you are there. $225.

Let’s see if this is right side up.

You've got a PM.

Hydraulic roller??

Sold. 61-63 was the first to PM me and he took it. Thanks for the interest.

Is that the butcher special?

If you would look at the specs on SD Performance's "Stump Puller" cam this one is basically the same cam but with .007/.006 less lift at the valve.

http://www.sdperformance.com/listPro...p?categoryID=2

[QUOTE=61-63;5914546]If you would look at the specs on SD Performance's "Stump Puller" cam this one is basically the same cam but with .007/.006 less lift at the valve.

http://www.sdperformance.com/listPro...p?categoryID=2[/QUOTE

John - is that god no to go into the motor you out into your Catalina ?

No I got this for my son's GTO engine. The cam going into the '63 motor is a much more radical 241/[email protected] cam on a 108lsa.