WTB throttle casble bracket and bellhousing dust shield
 

I'm looking for a throttle bracket for my 65 LeMans, I'm swapping in a 455 with a quadrajet coming from a 6 cylinder, year doesnt matter as long as it will work with the factory V8 throttle cable (need a cable as well) . Also in need of the dust shield for a manual trans bellhousing. I'm located in Canada and dont mind paying for shipping as long as its not going to cost more than buying new here....
Thanks
Trevor

PM Bob Vidan. He has quite a few brackets. May even have the cover too.

Excellent, thank you for the tip.

IF
 

If Bob cant help
I am fairly sure I have everything from a 70 bracket 4bbl cable and a used dust cover ... I have 70's NOS but they are alot more than a repop...

year of intake matters.. 71 n older or? 72 for sure n newer is different

cables change also 4 bbl is lon ger

the hold down changes in 72 ? and the later carbs go from a stud and cotter pin at the carb ... to a snap on ball ... and from a clamp style cable holder to a
square plastic plug with a barb ...

Scott

watcha got

maybe when Bob gets done watchin the reruns of womens tennis he will
give you a shout out .... or check him out at

Zboos pontiac parts hes got alot of nice parts on there for your visual pleasure

The intake is a 1969, the carb is a 1968 so it has the stud and cotter for the throttle cable. and the car is a 65 LeMans thats getting a 1974 455 so its a bit of a mixed bag...... definatly not going to win any originalty awards thats for sure . I sent Bob a PM to see what he had will let you know.
Thanks
Trevor

Hello

I'm still looking for a throttle cable bracket that will work on my 65 Lemans year isn't important as long as it will work. Though I'd try again before buying a repop one. I'm located on the west coast of Canada and do not mind paying shipping.
Thanks
Trevor

I have one in NY, I don't mind shipping, $35 plus shipping