NEW IA2A ready to assemble
 

sold car this was designated for, will consider selling short block and a set of heads.
virgin block fresh from machine shop jail, 55mm roller bearings, bushed 903 lifter bores, dry deck
4.31 bore ross pistons, 6.75cc dome, 2.35/1.9 valve reliefs, BWE rings already hung on the pistons which are on GRP aluminum rods
Scat 4.35 stroke crank with SBC rods journals, crank is 10/10. 1967 bob weight balanced to 1/3 of a gram, FM main and rod bearings included
comp cams 55 mm roller cam
270/286 112 lsa .521/.500 lobe
Crower 903 offset, bushed lifters
contact me if serious
19k will add pics and head details

"A" for aluminum?

Yes a for aluminum and expensive lol pics coming

Pics1
 

Pics

Pics2
 

Pics2

Pics3

Pics4

Pretty much everything needed for short block, is included. Only thing I can think of that I need to order if o keep it is rear seal of your choice and head gaskets
I have a set of hiports at the shop being looked over and a set of tigers fresh from the shop. If you buy the short block you will have first choice of cylinder heads and I will keep the others.
Hiports shouldn’t be too long before done. When they are I will make a decision on which motor is going in my gto and this aluminum motor may no longer be available

$18,500 consider trades towards a convertible pontiac or buick

A for Available

buy this and my tigers and have your fast and junk ready for norwalk

last price drop before it starts going together $17000 tigers/kre heads are no longer available in the package

drool...putting on xmas list

Just curious, what compression ratio were you targeting in this motor ?

All depends on head Cc head gasket thickness and diameter
But we are planning on 14+ W 65cc heads

Thanks, currently have an iron IAII with hi ports in my 66 GTO but want to go all Aluminum. This is very cool but probably too much for what I’m trying to do in a predominantly street driven car

https://youtu.be/vz-l29omL70

Bump

Available for Santa

Currently available

most likely last bump, before i start assembling, will consider (car) trades up or down money wise, in next 3-4 weeks