|
PST 4" 6061 DRIVESHAFT
1 Attachment(s)
Lightly used 4" PST aluminum driveshaft. It has just over 200 passes in it's life, all but a handful footbrake. Was used behind a 530hp/500ftlb 400 in a 72 LeMans. I built new tubular lower control arms and made them slightly longer than the old ones and now I need to do a new shaft to make up for the extra length.
57-1/2" from tail housing to face of the pinion yoke, 1350 joints, std spicer type slip yoke for 32 spline TH-400. No SFI tag. Shaft is $659 new from PST Shaft is still in the car, I will sell this one one for $550.00 shipped to your door. |
Approximately 54-1/4” center to center “C” measurement
|
Sold
|
| All times are GMT -4. The time now is 06:47 AM. |