 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
11-04-2022, 11:51 AM
|
||||
|
||||
PST 4" 6061 DRIVESHAFT
Lightly used 4" PST aluminum driveshaft. It has just over 200 passes in it's life, all but a handful footbrake. Was used behind a 530hp/500ftlb 400 in a 72 LeMans. I built new tubular lower control arms and made them slightly longer than the old ones and now I need to do a new shaft to make up for the extra length.
57-1/2" from tail housing to face of the pinion yoke, 1350 joints, std spicer type slip yoke for 32 spline TH-400. No SFI tag. Shaft is $659 new from PST Shaft is still in the car, I will sell this one one for $550.00 shipped to your door. |
|
#2
11-06-2022, 02:32 PM
|
||||
|
||||
|
Approximately 54-1/4” center to center “C” measurement
|
|
#3
10-03-2023, 04:21 PM
|
||||
|
||||
|
Sold
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
