WANTED: 1966-67 HEATER HOSE SUPPORT BRACKET.
 

This bracket was used on models with Air Conditioning.
I know A-Bodies for sure,
F-Body, I'm not sure.

Let me know if you have one to sell. Thanks!

Still Looking.

Still on the hunt..

THE HUNT IS OVER
 

I think I've been looking for this little Bracket on and off for well over 10 Years :eek:
Thank you Chris for remembering about my quest.

I owe you Brother!! :thumbup:

https://live.staticflickr.com/65535/...faa9d3e2_z.jpg

looks easy enough to fab up

3D print a set of dies

Yea my printer doesn't do 3D ;)

Made one out of flat stock years ago but nowhere near as detailed as OE.

Jeff when someone bends over to look at your copy,and says something about it,
do as Red Forman says,"how would you like my foot up your ass?"

I just checked,and the Sprint Im currently disassembling for restoration still has said bracket attached.
So that means me constantly moving the car has paid off,and Jeff hasnt found it yet.
I have parted out a few OHC-6 with AC so perhaps I have one stashed somewhere. I ll look when I have a chance.

Post #4 says "The hunt is over", so I think he found one.

for some reason I took that as someone had finally found one to photograph

No it's mine :D

good deal,it wouldnt be pretty with me trying to find one in all this stuff.

Soaked off all the crud...
https://live.staticflickr.com/65535/...5d8f620f_c.jpg

Jeff,have you tried dipping small parts to repaint?
Use catalyzed Rustoleum.
So that you dont waste a lot of catalyzed paint,pour paint in a container about 2x as deep as your part,
that was filled with water first.
The paint will float on the water.
Slowly dip the part thru the floating paint film.
Once the part is completely coated slowly pull it back thru,hang to drip dry.

I figured it took so long to find this little SOB I would make it standout as much as possible.
Cast Iron Heat Coating was my choice :D

https://live.staticflickr.com/65535/...440505c35c.jpg
https://live.staticflickr.com/65535/...ae1a2ab72c.jpg
https://live.staticflickr.com/65535/...1151fd08_z.jpg

hummmm ribbed heater hose
good job