1963 Tempest Build
 

Hi fellas,

Been a long time since I had a major project. Looking for pictures, advice, and options for the 61-63 front suspension. Over the years I have watched a lot of fast Little Indians rip down the 1/4 mile! With no aftermarket what have members done.

Build is a 4 link rear suspension and looking to retain as much body structure as possible.

Welcome to the board! Here's what I did with my 63 back when it was being built. It actually worked pretty well. I believe Dave Johnson went high 8's with a stock steering set-up.

https://forums.maxperformanceinc.com...ht=rack+pinion

R70 Judge what master cylinder did you use? I like the ports towards the inner fender. I'm using front discs from guy on here forgot his name,duh.

I searched through my old posts and found this list

2)Earl's#63010114 flex line
2)Earl's#961603 pipe to AN adapter
2)Earl's#989543 tubing adapter
10) Mr. Gasket#4311 studs
1)Strange Engineering#B3359 master cyl.
1)Wilwood#140-0261B brake kit

IIRC The disc brake brackets were from 63Longtop here on PY

Hi there, welcome

You may want to look for TwoOldGoats on here. He runs one, I sold him my blower/intake set up and he runs in the 7s I believe.

That may help too

Finally brain remembered, Scarebird s parts.