|
thermostat housings
4 Attachment(s)
hi guys:
this 64 gp is my first pontiac. all my years has been devoted to caddys, all 500 ci's. i cannot find a thermostat housing to replace the one on my caddy. the thing i found out is that my 64 gp has a thermostat housing bolt spread of 3" matches the caddy bolt spread. chevy's spread is larger and it is difficult to get a good seal. here are two picts, one caddy and one off the 389. the caddy is straight up and the pontiac is slightly angled. anybody know of a pontiac housing that is straight up that would match the caddy? i could even use one that leaned in the opposite direction of the caddy. thanks. mario64 |
March performance has this one. https://www.summitracing.com/parts/m...5/make/pontiac
|
hi jwcfbc:
thank you for that heads up. i went to march's website and found a black one BTH-101-08 and sent them an email asking for some dimensions. we'll see how long it takes to get back to me. thanks again. mario64 |
1 Attachment(s)
march never responded. found a used, but better than min, replacement.
thanks all. mario 64 |
The 56 & 57 were cast & straight up...
|
| All times are GMT -4. The time now is 10:22 PM. |