| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
||||
|
||||
|
hi guys:
this 64 gp is my first pontiac. all my years has been devoted to caddys, all 500 ci's. i cannot find a thermostat housing to replace the one on my caddy. the thing i found out is that my 64 gp has a thermostat housing bolt spread of 3" matches the caddy bolt spread. chevy's spread is larger and it is difficult to get a good seal. here are two picts, one caddy and one off the 389. the caddy is straight up and the pontiac is slightly angled. anybody know of a pontiac housing that is straight up that would match the caddy? i could even use one that leaned in the opposite direction of the caddy. thanks. mario64 |
|
#2
|
||||
|
||||
|
March performance has this one. https://www.summitracing.com/parts/m...5/make/pontiac
__________________
67 Firebird Convertible |
|
#3
|
||||
|
||||
|
hi jwcfbc:
thank you for that heads up. i went to march's website and found a black one BTH-101-08 and sent them an email asking for some dimensions. we'll see how long it takes to get back to me. thanks again. mario64 Last edited by Mario64; 05-21-2026 at 03:15 PM. Reason: spelling |
| The Following User Says Thank You to Mario64 For This Useful Post: | ||
|
#4
|
||||
|
||||
|
march never responded. found a used, but better than min, replacement.
thanks all. mario 64 |
| The Following User Says Thank You to Mario64 For This Useful Post: | ||
|
#5
|
|||
|
|||
|
The 56 & 57 were cast & straight up...
__________________
"At no time did we exceed 175 mph.” Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea... Still have my 1st Firebird 7th Firebird 57 Starchief |
| Reply |
|
|