ok i got the distributor in, but after i read this again i believe 71 Ventura says "a the dots on your timing set were both at 12'oclock." i thought TDC is when the crank dot is at 12 o clock and cam dot is at 6 olock....am i wrong ??? if i am i have to go back and turn the engine over 360 degrees right?? until the balancer is at 0" right?
also, my balancer has from 0-60 degrees its a perfomance prodcuts type, do i have to get a timing tape that has the BTDC marks? for me to get it at BTDC?
__________________
463 Stroker Kit.
ross pistons. h beam rods. eagle crank.
62 heads 72cc, port matched
Performer RPM-850DP
Auburn- 3.55 gear
CC HR custom grind
|