Quote:
Originally Posted by Ollie
Thanks, Bluethunder.
That gives me ideas for my set up.
Is the sender compatible with the 2nd gen gague?
|
No problem.. I have 100s of pics from my nut and bolt rebuild.
As far as mods go, it was pretty easy. Probably took an afternoon. The sender was from a late 80s firebird v6 with multiport. I replaced the old pump with a new walbro 255lph.
Once I was done, I plugged off the other lines, and pumped 10psi shop air in, and leak checked the tank. Had a few pin holes that needed some attention.
Yes, the sender is a 0 to 90ohm, which is the same as the one in my 80. I'm not sure about other years though