Quote:
Originally Posted by Ozzmann
On my 69 Goat, the drivers side inner guard/fender has a molded bump right in the middle at the top near to where it attaches to the fender. It's around 3" long and 1/2" deep.
Why is it there? With my drop spindles now fitted my tire scrubs on this area.
I can't see any point in it, so will be removing it, but I am curious.  |
The defect that you are describing doesn't sound what I'm going to describe, but I believe that one method of replacing the blower motor is to cut an access hole through the driver's side inner fender. Mine had a patch panel attached with sheet metal screws in this area.