Quote:
Originally Posted by gregsgtos2
Could the problem be the switch in the dash?
|
Switch checks out and is good. Low, high, and washer on the switch work.
Here is where I am at today
Something is out of whack in the back of the unit where it bolts to the wiper linkage. I got the unit to work, and ironically as soon as I tried hooking up the wiper linkage or assemble it started running (switch in the off position). First thing I thought OK it has to be some sort of ground short. I unplugged it, unbolted the wiper linkage off and plugged it back in.
I then took a wooden dowel and gently nudged the bolt or thread and it started again.
Currently I think I either did something to it when initially hooking it up, or I have a defective unit.
Simple job has turned into a complex. I will plug away at it some more this evening.