Quote:
Originally Posted by Zoojelly
I was thinking of replacing fuel pump with electric unit and run new braided flexible lines
|
-6 hose...which is basically 3/8"....and alot of practice cutting the hose and installing the ends! Use Aeroquip or Russel's....stay away from cheap in-house brands like Jeg's...etc...and good luck! PS...I used electrical tape and a sharp hatchet with @ a 2# sledge and lay the hose on an anvil or steel plate and strike it...similar to a cable cutter. Don't laugh until you try it. I've tried hacksaws and such...to no avail.