Quote:
Originally Posted by gto4evr
In my experiences with endura noses, I've seen a difference between 68 and 69 in the area where it meets the fenders. 69's were square cut in that small relief area for the endura to hood front gap and 68 had a "swoop" curve instead of the right angle cut. Now if that's specific to a manufacturer, (if there were multiple ones) I can't say but I've had 3 69 enduras with the square cut and I've had 2 68's with that swoop cut.
|
Only one supplier for the endura front end - Inland.
One supplier was enough (trouble), in this case....
Usually with a new technology or a somewhat tricky part we try to keep it down to just one supplier.
K
__________________
'63 LeMans Convertible
'63 Grand Prix
'65 GTO - original, unrestored, Dad was original owner, 5000 original mile Royal Pontiac factory racer
'74 Chevelle - original owner, 9.56 @ 139 mph best
http://www.superchevy.com/features/s...hevy-chevelle/
My Pontiac Story: http://forums.maxperformanceinc.com/...d.php?t=560524
"Intro from an old Assembly Plant Guy":http://67-72chevytrucks.com/vboard/s...d.php?t=342926