Quote:
Originally Posted by Kenth
Instead of messing with the intake, use the correct flange gasket.
Pontiac flange gaskets for Pontiac Quadrajets, to the left 1970-74, to the right 1975-79.
FWIW
|
If you look at the pictures Ive posted of my HO intake ( first post), then add Dave's CNC program through the intake, then Ill weld a 1/8" divider plate back in.
After that I top it off with a 3/4" thick Nitrous plate which is essentially a spreadbore open space with spray bars.
I will end up making my own gaskets.
Peter