[wh33lman]

Originally Posted by grivera

Nevertheless, with the cork, yes, glue to cap first. Cliff R has a really good pic of how he sets it up - http://forums.maxperformanceinc.com/...95&postcount=6

Yes , I see what he has done there. I wonder how thick it is ? The cork piece that comes with the Felpro kit appears to be much thicker.

To fix the pan rails, I use a thick bolt as a drift to tap down the bolt holes flush. Then I get a piece of wood to fit in the pan's flange, approximately 1/2" wide by 1/4" thick. Then use pliers to bend the flange flush to the block...using a feeler gauge to ensure it has no gaps. This way you do not damage the pan