Quote:
Originally Posted by i82much
pretty sure I have clearance for a T2 and a 1 inch spacer, the RPM is on the car now. I didn't notice much difference between the two intakes, but we know how butt dyno's are ...
The road paver recommendation is intriguing because then I start to wonder about whether a beehive spring and light retainer might let me buzz it to 6000 RPM or so safely, I have the rev limiter set at 5500 now and it seems to fall off right about then anyway.
|
I have the Road Paver on 463 cubes. 330 eddy heads with a gasket ported T2 for SCE 128103 gaskets. 1 inch open wood spacer.
6000 to 6400 is no problem. Even though, 6400 is too high for that cam on my cubes. Even worse on your cubes. But, it does love to fly to 6000 without paying attention.
