Quote:
Originally Posted by Half-Inch Stud
Hacksaw for cutting EXH pipes. Donta own a sawzall.
Muscle effort and the hard way are my choice, to get the exercise.
|
Understood and agree the exercise is good. But I can't keep a hacksaw moving in a straight line.
This:
Quote:
Originally Posted by HWYSTR455
I get that, but it's tough to get a good, square cut with a saw or wheel. .....
|
Quote:
Originally Posted by HWYSTR455
Tailpipes look like they are pointing at an angle downward, not sure you will be able to adjust them much, if at all.
You can probably get them a little higher, and then use a generic turn-down. You can't put a tip on and make it stay 'angled'....
|
The tail pipe stubs are actually pointed down a little. I started another thread about options to replace the tips I cut off:
https://forums.maxperformanceinc.com...errerid=160974
Quote:
...
I've found the ratcheting ones are the best, and worth it if you do a number of exhaust work over time....
|
Good to know, thanks.... so buying a used one with worn out wheels is probably stupid.
Quote:
I do all my exhausts on jack stands laying on my back, Pypes kits for years. I've tried all the cutters, and although the Lisle ones are 'better', but they flex if you tighten them down too hard. And same thing with once the blades start going, you will be 'cussin'....
I lightly clamp the pipes together with U clamps after marking a line across the joints. (in case it moves some during transport). Then take it up to a shop to get them welded. Any final fine-adjustments the shop can make as they weld.
|
I think I'd have to pay a shop to do this but my priority for now is to just get rid of the giant tips. The rest of the exhaust is in better shape than most of the car. It has glass packs that will have to go away some day so maybe then..
Quote:
OE hangers are nice to use, there's considerable adjustment you can make with them (before welding mostly). Never 'load' the exhaust to get it where you want, over time it just rips the hangers off.
The approach has worked well for me over the years.
Personal tip: Always put an O2 bung on. You can plug it, but if you ever want to go efi, that part is done. Can be used for wide band tuning too.
|
All good input, thank you.
Mike