| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
10-20-2004, 04:59 AM
|
||||
|
||||
Heres a pic of my new bullet. Should be running by Friday this week.
|
|
#2
10-20-2004, 05:18 AM
|
||||
|
||||
|
JBP 320+ CNC heads (standard port), 400 block, 467 kit from JBP, 1050 Holley, Victor, 270@ .050 roller, 1.65 rockers, 6.8" eagle rods, Ross pistons, gapless rings. 87cc E heads and Hooker super comps.
TH400, 3000 stall, 3.42 gears. I am hoping the low stall will let it hook and then when the it starts making power about 4000 due to the duration it will start to pull rather than spin. |
|
#3
10-21-2004, 01:46 PM
|
||||
|
||||
|
Hey Todd, what were your 1/8th mile times and speed with the 670 heads?
Dwight |
|
#4
10-22-2004, 07:32 PM
|
||||
|
||||
|
Todd, from what I can figure, you are out of Charleston SC. My motor is torn down at the machine shop now getting some R&R.
We should get together to test and tune at Dorchester. Mine should be ready for the bottle in about 3 weeks.
__________________
70 Formula Old engine: 467 HO headed 6.79 1/8th mile @ 101.87 no N20. 1.44 60ft 6.23 1/8th @ 111.83 w/nitrous 1.37 60ft New Engine IAII 535 Calvin Hill Eheads Few test passes made. Tore it up. Just got it fixed. |
|
#5
10-23-2004, 06:40 PM
|
||||
|
||||
|
I use 12 pt header bolts and a "special" boxed end ground thinner. One I had so thin it broke when I used it. Next set I'll heat and make that bolt dimple and the same one on the other side bigger.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune [email protected] 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs 1964 Corvette Coupe 327 4 speed |
|
#6
10-20-2004, 04:45 PM
|
||||
|
||||
|
very nice!!!.what intake is that?
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74  2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#7
10-23-2004, 12:04 AM
|
||||
|
||||
|
Its between the fenders, almost completely hooked up. The Victor took alot of rework to get it to fit. Mostly around the bolt holes. Not enough clearance to get them in.
Figuring out the alternator and simple stuff like the intake took most of today. It should fire tomorrow, if all goes well. I was told the Hooker Supercomp headers would be a pain, they were easier to install than my D port headers. They fit great, no massaging, and I have enough room to get to the filter, plus the bolts were all easily reached. Drivers side bolt #4, the one behind the center tubes caused the most trouble, a friend above and me under the car turning it a flat at a time worked good. If Dougs are easier, then they will install themselves! I am curious to know how other headers would fit. Thanks for the positive inspiration and the compliments. Russ I get out to Dorchester once in a while. I grenaded the old 455 back in April so I havent been out since. We meet at Sams on Rivers every 1st and 3rd saturday between 5 and 7 pm. Come on out and look for all the Fbodys, I might have it out sometimes since its still street legal. More pics tomorrow, if anyone wants to see them, some parts of it are "ghetto" lol. |
|
#8
10-21-2004, 06:44 AM
|
||||
|
||||
|
12 point cage is on the way, its the winter project, as are subrfame connectors, glass front end and doors. I am still looking for ways to get lighter, Ray has been really helpful in that area.
It hooked pretty well with the 670 headed 455 and slicks, 1.5x 60 fts with only a 3000 stall. On the BFG's that are in the pic, it did a best of 1.69 but usually spun just a bit and pulled 1.75-1.79. That was on a slippery track in defense of the BFG's. Should be running this evening. Got all my parts and its on to the thrash untill it moves under its own power again.. |
|
#9
10-22-2004, 12:06 AM
|
||||
|
||||
|
Nice motor but dam is your avtar annoying!
__________________
ET 12.504 MPH 107 3940 lbs |
|
#10
10-22-2004, 05:48 PM
|
||||
|
||||
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Todd S.:
Edelbrock Victor with 4500 flange. No crank scraper, and I am hoping for bottom tens to high nines if it ever hooks. Its getting lighter by the day. <HR></BLOCKQUOTE> Maybe 10.50s-10.40s will be my guess. you will need 700hp or more to get to high nines mike m. |
|
#11
10-20-2004, 08:19 PM
|
||||
|
||||
|
Edelbrock Victor with 4500 flange. No crank scraper, and I am hoping for bottom tens to high nines if it ever hooks. Its getting lighter by the day.
|
|
#12
10-22-2004, 09:46 PM
|
||||
|
||||
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR> <HR></BLOCKQUOTE>Maybe 10.50s-10.40s will be my guess.
you will need 700hp or more to get to high nines mike m.[/QUOTE] That depends on what the car will weigh and how well the chassis works. My car has ran a best of 10.10 with "only" 638 HP. But it weighs 3100 lbs with me in it. The combo Todd S. has sounds similar to mine so if he can get the weight down and get the car to hook he should be in the ballpark for low 10s or high 9s.
__________________
North Dakotas fastest REAL GTO 10.10 @ 131 MPH in the 1/4 Hoping to get it back together some year. www.jandjrepairandrestoration |
|
#13
10-20-2004, 05:08 AM
|
|||
|
|||
|
Todd that looks like a serious engine you have there. What are the specifics on it.
|
|
#14
10-20-2004, 09:17 PM
|
||||
|
||||
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Todd S.:
Here's where its going. Looks like I need to do some cleaning before I put it in there. <HR></BLOCKQUOTE> And install a roll cage, traction devices, and laundry if your heading for the nines. Looks good though.
__________________
"For some reason a glaze passes over people's faces when you say "Canada". Maybe we should invade South Dakota or something." 
|
|
#15
10-21-2004, 10:38 AM
|
||||
|
||||
|
Todd,
That looks COOL!!!! I think Grandville asked what intake it was because it looks huge (tall) in the picture. I was thinking the same thing.
__________________
You know it's going to be a good day when you wake up breathing! |
|
#16
10-20-2004, 11:10 AM
|
||||
|
||||
|
Very cool looking power plant. Did you use a crank scraper? Sounds like a killer combo. Please let us know how she does at the track.
Tim C
__________________
Tim Corcoran |
|
#17
10-21-2004, 09:31 PM
|
||||
|
||||
|
I will not paint my engien RED! My engine is prettier, your car has better looks...lol. Mine's faster.
|
|
#18
10-21-2004, 01:53 PM
|
||||
|
||||
|
288-296 Ultradyne hyd cam, 3000 stall, 850 holley, 4.11 gears, 3650lbs, torker II intake, and JBP ported 670's netted 7.7-7.5 90-93mph in the 1/8.
The new one is a completely new engine. Two factory parts used, 1: the block, 2: Cam retaining plate. |
|
#19
10-21-2004, 07:38 PM
|
|||
|
|||
|
I'm privy to getting to witness the birth of this creature...
BUT MINE STILL LOOKS PRETTIER!!!
__________________
__________________________________________________ ___ Ja Whitfield  |
|
#20
10-20-2004, 04:59 AM
|
||||
|
||||
|
Heres a pic of my new bullet. Should be running by Friday this week.
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
