| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
01-26-2011, 01:32 AM
|
|||
|
|||
TATA Head Bolts
Does anyone have photos or know what 78' or 79' w72 head bolt markings look like?
I had two on my TATA that had damage from someone putting exhaust bolts in that were too long so I bought a set off Ebay, supposedly a factory set from a 78' w72. The 78' head markings were different and had one more studded bolt than the ones pulled from the 79'. I'm trying to determine what would be correct for the TATA. Thanks tltw72 |
|
#2
01-26-2011, 12:02 PM
|
|||
|
|||
|
are you talking about the cylenderhead to block bolts? I have an all original 400 from a tata in my shop
|
|
#3
01-26-2011, 11:13 PM
|
|||
|
|||
|
Yes. I would appreciate it if you would check and see what head markings they have.
|
|
#4
01-27-2011, 06:42 PM
|
||||
|
||||
|
Replaced my 30 yr old head bolts with AARP when I rebuilt the engine on my 78 TA 6.6
__________________
Butch |
|
#5
01-27-2011, 07:31 PM
|
|||
|
|||
|
should have three studed head bolts drivers side one on the passenger. the others have a circle on top of the bolt. hope this helps
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
