FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
1982-92 TA & FB TECH 1993-2002 TA & FB Tech is now part of the new Late Model Section of the PY Forums. Click this link to check it out. |
Reply |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Tech tip on the rear lower control arms.
I found out today that if you buy the inserts for the '64-'72 GM A-Body Lower Rear Control Arms, that they also will fit the '82-'02 F-Body. That is what I will do instead of buying a set of control arms. If anything helps with saving money (only got the polyurethane bushings) then that will work for me.
Now, if I only can obtain an insert for the panhard bar. |
#2
|
|||
|
|||
I just take some flat steel and weld it in from bushing to bushing. Did that back in the very early 90s. Some of the early 82-85/6 cars had that bolt in reinforcement from the factory. But that is a great tip, will add to my melon..
__________________
http://www.fquick.com/garages/viewga...ewimg&id=74990 "You people have stood in my way long enough. I'm going to clown college." -Homer Simpson |
#3
|
||||
|
||||
I will try that.
On the steel, I will do that. Thanks.
|
Reply |
|
|