[F9driver]

I know there is an awful lot of great information on this site regarding wheel restoration. This article was posted elsewhere on the internet but that site is no longer....hope this can help someone down the road.

CLW

BTW...I have no idea how to rotate the pages...sorry

[charles bledsoe]

Thanks for posting!

[RLEngland]

Thank you!

[78w72]

Notice the primer HPP is using ...

[burd]

Originally Posted by 78w72

Notice the primer HPP is using ...

This is for the person to do their wheels out in the drive way. Craigs list resto.
Ive never seen kindig get a can or sem out. Lmao.
Hpp also told up to cut our shakers open to get all the extra HP. ��

[Formulabruce]

Originally Posted by burd

This is for the person to do their wheels out in the drive way. Craigs list resto.
Ive never seen kindig get a can or sem out. Lmao.
Hpp also told up to cut our shakers open to get all the extra HP. ��

Kindig patented door handles that were Stock on some 1972 Pontiacs... 40 years later its "his" design .. just saying.

[rildon]

Thank you for the advice. Any chance you have a link for the HPP article you mentioned

[78w72]

Originally Posted by rildon

Thank you for the advice. Any chance you have a link for the HPP article you mentioned

I dont have a link, but the pics from the magazine are in the first post on page 1 of this thread.

[rildon]

I need some help on this Honeycomb project. I top coated one rim on the left, but had to primer the second then top coat on the right. The result is two very different colors and looks. The left keeps the original look from what I can tell but not sure what to do next. The other 3 rims could all probably be just top coated to match. Thoughts, ideas and help please.

[kingbuzzo]

in progress rn...thx

[78w72]

LOL!

[burd]

Lol

Recently I’ve use OER interior dye, it’s for parts I’m selling, it’s still a spay bomb type, CL Resto.

[78w72]

LOL...

[burd]

Originally Posted by 78w72

LOL...

Yes it’s shiny crap. Good enough to sell at Dayton.
I go to auto body paint store to get the good stuff mixed up.
Oer is prom SEM GARBAGE

[78w72]

Originally Posted by jonesyboy

Any recommendations if you have a decent amount of surface rust to deal with under the trim rings? I have a '71 Formula 400 with a build sheet that said it came factory with the Honeycomb wheels. Would like to keep it factory, but the wheels I have need a more serious restoration than what is described here (although, very helpful!!). Any advice from anyone that knows or has done this work? Can the Honeycomb insert be removed and then epoxied back into place? I don't want to "experiment" with any of my wheels, if possible. Thanks!!

If its just rust around the edges where trim rings go that can probably be cleaned up unless it is under the endura HC area too. But probably not a good idea to attempt removing the honeycomb then epoxy back in place, for all that work and unknown amount of rust underneath it would be cheaper & easier to find some nice used wheels and restore them. Doing it as HPP shows or countless others have done is perfectly fine & will last for a very long time.

I did these with the OER magnesium wheel paint & SEM primer that according to one guy that bashes anyone that uses it is "CL gravel driveway resto" LOL! Been holding up great for about 10 years now and looks like the day I did them.

Originally Posted by burd

Yes it’s shiny crap. Good enough to sell at Dayton.
I go to auto body paint store to get the good stuff mixed up.
Oer is prom SEM GARBAGE

Give it a rest, gets real tiring when you keep bashing anyone who doesnt do what you do... just because paints are in a spray can doesnt mean they arent good quality, you can have dupont, PPG or any brand paint put in a spray can at auto paint stores, Ive had it done for touch ups or smaller parts. Plenty of body shops use all kinds of SEM products... they are sold at auto body paint suppliers too.

[rildon]

Your Honeycomb project looks great to me. Looking for a little advice on mine if you don’t mind. I have some on a 72 GP that are honestly in pretty good condition with just some minor blemishes. They may have been touched up before. I really just want to give them a fresh topcoat using the OER Magnesium. What type of sanding and primer should I be doing and using. I can post pics later.
Thanks!!

Originally Posted by 78w72

If it’s just rust around the edges where trim rings go that can probably be cleaned up unless it is under the endura HC area too. But probably not a good idea to attempt removing the honeycomb then epoxy back in place, for all that work and unknown amount of rust underneath it would be cheaper & easier to find some nice used wheels and restore them. Doing it as HPP shows or countless others have done is perfectly fine & will last for a very long time.

I did these with the OER magnesium wheel paint & SEM primer that according to one guy that bashes anyone that uses it is "CL gravel driveway resto" LOL! Been holding up great for about 10 years now and looks like the day I did them.



Give it a rest, gets real tiring when you keep bashing anyone who doesnt do what you do... just because paints are in a spray can doesnt mean they arent good quality, you can have dupont, PPG or any brand paint put in a spray can at auto paint stores, Ive had it done for touch ups or smaller parts. Plenty of body shops use all kinds of SEM products... they are sold at auto body paint suppliers too.

[jonesyboy]

Originally Posted by F9driver

I know there is an awful lot of great information on this site regarding wheel restoration. This article was posted elsewhere on the internet but that site is no longer....hope this can help someone down the road.

CLW

BTW...I have no idea how to rotate the pages...sorry

Any recommendations if you have a decent amount of surface rust to deal with under the trim rings? I have a '71 Formula 400 with a build sheet that said it came factory with the Honeycomb wheels. Would like to keep it factory, but the wheels I have need a more serious restoration than what is described here (although, very helpful!!). Any advice from anyone that knows or has done this work? Can the Honeycomb insert be removed and then epoxied back into place? I don't want to "experiment" with any of my wheels, if possible. Thanks!!

[burd]

Your finally rite on the wall art crap. Lmao.
No rest, you get quality rest stuff or you buy rattle can CL driveway Resto.

[Verdoro 68]

I'm also happy with my "driveway Craigs List" resto using OER paint. I actually did the work in my driveway, too. Figure that. Sandblasted the wheels, used two part flexible epoxy to fix the big flaws, lots of sanding - similar to what you'd do for an Endura bumper. Came out good enough for our driver Ventura.

Agree that just because the paint comes in a rattle can and isn't from an auto body supply shop doesn't mean it's not quality. If you have the equipment, space, time and money to go Kindig on your stuff, have at it. Not all of us do.

I also agree on finding a better set of wheels if the rust is under the urethane. Post some pics of what you're working with.

[jonesyboy]

Originally Posted by Verdoro 68

I'm also happy with my "driveway Craigs List" resto using OER paint. I actually did the work in my driveway, too. Figure that. Sandblasted the wheels, used two part flexible epoxy to fix the big flaws, lots of sanding - similar to what you'd do for an Endura bumper. Came out good enough for our driver Ventura.

Agree that just because the paint comes in a rattle can and isn't from an auto body supply shop doesn't mean it's not quality. If you have the equipment, space, time and money to go Kindig on your stuff, have at it. Not all of us do.

I also agree on finding a better set of wheels if the rust is under the urethane. Post some pics of what you're working with.

Really nice job on your wheel resto!!! I'm hoping mine turn out like this!!!