Pontiac - Street No question too basic here!

          
Reply
 
Thread Tools Display Modes
  #1  
Old 12-08-2003, 01:16 PM
QWERTTROY QWERTTROY is offline
Member
 
Join Date: Aug 2003
Location: Centerville, TN
Posts: 91
Default

Has anyone ever tried carb spacers on a factory tripower setup? Would there be any hp gain from this?

  #2  
Old 12-08-2003, 01:16 PM
QWERTTROY QWERTTROY is offline
Member
 
Join Date: Aug 2003
Location: Centerville, TN
Posts: 91
Default

Has anyone ever tried carb spacers on a factory tripower setup? Would there be any hp gain from this?

  #3  
Old 12-08-2003, 01:27 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,302
Default

I have run offy aluminum spacers (1/2") on top of
the cast iron 66 intake to adapt Holleys. Most
feel that a "riser" will even out the flow after
the throttle blade and will keep the fuel-air
mixture from hitting the floor at high velocities
but historically Pontiac tri-power intakes do not suffer from that problem as they were well designed by the factory for their carbs.

Tom V.


__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
  #4  
Old 12-08-2003, 02:36 PM
Rugratman's Avatar
Rugratman Rugratman is offline
Ultimate Warrior
 
Join Date: Dec 2002
Location: Wilmington N.C.
Posts: 4,037
Default

Just curious, but what about the fit ?

What Holley's did you use to make them fit ?
I did not know that Holley made a carb that would fit on the stock intake ? Only on the spacers ? Any modifications ?

I'm thinking ahead for the new aluminum intake.....

__________________
........I'm just learning as I go.......
  #5  
Old 12-08-2003, 03:08 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,302
Default

I used a 440 six pack set of carbs.

I used Offy Holley to Rochester (Large base) spacers.

There were no clearance issues on a 1966 Tri-power
intake.

Tom V.


__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
  #6  
Old 12-08-2003, 05:36 PM
wheelspin's Avatar
wheelspin wheelspin is offline
Ultimate Warrior
 
Join Date: Oct 2003
Location: Hacienda Hts., SoCal
Posts: 4,345
Default

Tom,

If this combo was tested, what performance benefits did you gain utilizing Holleys on the OE trip manifold ?

Les

66 GTO Coupe,455/trips,700r/2500stall,12bolt/3.08,1.79/13.01/104.5
68 GP daily driver and 2004 Route 66 Tour participant under restoration
--------------------------
Better lucky than good

__________________
Les Iden
----------------------------
'65 Buick Sport Wagon Custom, 340, T350, 3:23
'66 GTO Post/468, 700R4, 3.31 (Mike's as of 9-16)
'68 Grand Prix/455, dual AFBs, T400, 2:93 posi (sold)
'72 TA tribute/461, T400, 3.08, (Russ's as of 9-16)
'97 Mitsubishi Eclipse Spyder Turbo, Konis, 5 speed
'09 Torrent GXP, nav, Sun & Sound pkg., Bilsteins
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:23 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017