| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
01-14-2005, 02:41 PM
|
||||
|
||||
Some pictures of my engine that will be runing soon, It is the orignal 71 400 Block 0.60 over with the original M-21 four speed that I redid a few years ago. Tell what you think this Goat will run with a 3.55 gear. It will look stock when it is done to the novice.... Quadrajet, factory air cleaner, intake painted blue, ram air manifolds. It is a numbers matching car, except I am putting a of 6X-8 on it but I have the original 96 heads in my garage.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#2
01-14-2005, 02:41 PM
|
||||
|
||||
|
Some pictures of my engine that will be runing soon, It is the orignal 71 400 Block 0.60 over with the original M-21 four speed that I redid a few years ago. Tell what you think this Goat will run with a 3.55 gear. It will look stock when it is done to the novice.... Quadrajet, factory air cleaner, intake painted blue, ram air manifolds. It is a numbers matching car, except I am putting a of 6X-8 on it but I have the original 96 heads in my garage.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#3
01-14-2005, 02:44 PM
|
||||
|
||||
|
Eagle rods in a stock lenght with a Aries custon made piston, Those slugs are very light. Full floating wristpins.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#4
01-14-2005, 02:47 PM
|
||||
|
||||
|
Close up of the Piston, I am using a Total Seal Rings.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#5
01-14-2005, 02:52 PM
|
||||
|
||||
|
A shot of the Crank original Nodiular Iron Crank .020 under rods. .010 under mains. Indexed and dementionalized. I suck at spelling!!!!!!!
 Had to remove a lot of weight cause of the lighter pistons.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#6
01-14-2005, 02:56 PM
|
||||
|
||||
|
A pic of the combustion chambers, chambers are exact same cc's at 102 chambers angles have been"smoothed out"
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#7
01-14-2005, 03:00 PM
|
||||
|
||||
|
Exhaust Ports tha have been ported and polished, 2.110 &1.660 stainless steel valves pretty light valves ones too.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#8
01-14-2005, 03:03 PM
|
||||
|
||||
|
Intake Ports Smae work done.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#9
01-14-2005, 03:06 PM
|
||||
|
||||
|
No expination needed!
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#10
01-14-2005, 03:10 PM
|
||||
|
||||
|
Comp Cames XR288-10 Hyd Roller Cam
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#11
01-14-2005, 03:15 PM
|
||||
|
||||
|
1971 WT Numbers matching block, I deburred it and removed any flashings on the block.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#12
01-14-2005, 03:20 PM
|
||||
|
||||
|
I reccomend polishing the lifter gallery area, I spent a frw hours on mine but it is verry messy, I have seen them look like a mirror before
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#13
01-14-2005, 03:26 PM
|
||||
|
||||
|
Crosshatch Pic
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#14
01-14-2005, 03:37 PM
|
||||
|
||||
|
1971 Original M-21 That I rebulit thats gonna go with my engine, I will be using the stock flywheel and a centerforce dual fiction clutch assembly.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#15
01-14-2005, 03:40 PM
|
||||
|
||||
|
Another Shot!
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#16
01-14-2005, 03:55 PM
|
||||
|
||||
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by GTO71: I will be using the stock flywheel and a centerforce dual fiction clutch assembly. <HR></BLOCKQUOTE>
Looks nice! Since you are doing all that why not pop for a new steel flywheel? |
|
#17
01-16-2005, 09:08 AM
|
||||
|
||||
|
Very nice. Love 'dem clean parts!
 Keep this thread updated on your progress...Good luck! Jim.
__________________
* '69 Custom S - 2dr Hardtop Coupe - Rust-free Oregon survivor with all original panels and original trunk floor * Engine alive and kickin' March 2nd, '06  * RA-IV 'spec' 400 (.060-over = 410ci), balanced, Comp Cams #9794041, #16 heads (72cc converted to large valve) with 1.65 Harland Sharp Rollers * QuadraJet #7042210, HEI, Hurst V-Gate, FlowTech Headers, X-Pipe with dumps, Flowmasters, TH-350, 3.90 Posi * Best ET: 14.06 - Bandimere Speedway, CO. @ 5,800+' |
|
#18
01-16-2005, 01:47 PM
|
||||
|
||||
|
Yeah,looks great,should run real strong too! I would think it'd be a blast to drive,just don't get too crazy without a scattershield!
|
|
#19
01-17-2005, 11:41 AM
|
|||
|
|||
|
That sh$t looks so good makes you want to just sleep with it.
|
|
#20
02-10-2005, 04:12 PM
|
||||
|
||||
|
The Crank and Cam in the block. Nodluar Iron Indexed Crank.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
