| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-28-2005, 06:31 PM
|
|||
|
|||
I have a 1975 pontiac 400 motor without a windage tray. The dipstick interefere's with the crank. I'm told Pontiac had a dipstick guide tube bracket that mounts to the #3 bearing cap. I need to get one of these brackets before I assemble the motor. What do they look like and where can I find one?
Thanks for the help, Vrroom
__________________
1969 GTO restoration project. |
|
#2
06-28-2005, 07:05 PM
|
|||
|
|||
|
You're missing the curved lower dipstick. It goes through the windage tray. It routes the dipstick to the rear toward the oil pickup. Why no windage tray?
__________________
GoatDr |
|
#3
06-28-2005, 07:10 PM
|
||||
|
||||
|
PY, Year One, AMES sells em. Get it from PY if you can!
__________________
http://www.christransam78.com/ |
|
#4
06-28-2005, 08:36 PM
|
||||
|
||||
|
Call AMES at 1-800-421-2637 ask for Quint. The part number you need is FN419L. 1972-1979 V-8 oil dipstick tube in pan with bracket for use with motors without windage trays. There are different upper tubes and dipsticks depending on if you have a/c or not. Tell Quint what you have and he will take care of you.
__________________
John  "There are no stupid questions, but there are a LOT of inquisitive idiots!" |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
