[BOWE62]

Are the stock t400 cooler lines supposed to be steel all the way to the radiator on a 67 gto. Mine are steel until about 1 foot from the cooler then they go to rubber with 3 hose clamps on each side where they connect, of which one is leaking. 5/16 rubber lines might be wrong size/too big. I put a new 5/16 with 2 hose clamps, leaking again at same spot. Do you guys have 1/4 rubber on there...Did previous owner cut these lines and with new tranny/radiator and there never was supposed to be rubber. Don't want to lose fluid and fry my firm shifting 400( although then I would have good excuse to go to a 200 r4 ) thanks for all your help greg

Greg Bower