[wlpsyp]

Hey guys,

I dont know what the hell is going on, but seems like all I am doing now-a-days is hitting brick walls on the car test fitting. Here is another problem I am running into.... Installing the damn radiator, seems simple but man what the.................

I bought a new four core radiator from PY and Amanda and I are test fitting it to the core support to make sure we have all the hardware etc. Couple question.

1. Once the radiator is installed, is it plum vertically or does it have a backwards lean to it? Our's is leaning back maybe 10 degrees (eye ball)

2. Seems that the radiator is to tall as the rear of the shield Towards front of car) (68 GTO) lays flat ontop of the core support but the front is lifted up off the core support about 1/4-1/2 an inch, meaning if we drilled the holes and tightened down the shield, it would bend. We are using new rubber bushings in all four locations and all bushing fit properly.

Can someone post a few pictures of an installed radiator from the side and back for us? I can post pics of our problem if needed. Going to go buy some beer now....

Thanks,

Frustrated Bill