Quote:
Originally Posted by Lloyd-TX
Steve - I'm unsure what the stock float level is for your carb, I'll have to check my '72 service manual. It's quite a bit lower than 5/16" I'm fairly certain.
Answered your PM as well, my friend.
|
The factory manual has the 72 float spec as 1/4" (which, if my math is correct is 4/16").
Lloyd, my question is this: Isn't 5/16" going to be a lower float height which means less gas in the float well?
Once I get your parts here, I check the float spec and update you all.
11-20-2010, 12:26 PM
Threaded Mode