[quicksilver97ta]

Originally Posted by shaker455

Quick,

Dist:
If you have your initinal @ 19 then leave the vac advance unplugged for now.

You posted you have 18 degrees of mech adv so that is good if your at about 37 total.

Start up and shut off okay?

What RPM does it all your advance come in by?

Okay the Carb:

You have an 830...okay

You need a 50cc spring & housing to run a 50cc pump set up so you don't have enough parts.

You have a #218 cam and I have one here too....it appears almost white or slightly green.

If you have the Pink #330 cam try them as they will produce the most cc's per shot.

Green is the next one down from the pink.

Your plug looks slightly lean but you need to go out and put some miles on them to color up.

I figured that on the 50 cc pump parts deal.

I do have some pink cams to try, will do.

Slightly lean? Wow, I'm looking at the ring and that thing is pretty dark after running the 82's. But I did install those 84's last night so I'll leave them for now and just install the pink cams. Any trick to that? I havn't taken that part of the carb apart.

No problems starting or shutting off. Not sure when total is in, need two people. Can do on the vac adv but have to ask why?

Will try the pink cams and report back.