| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
08-11-2012, 06:16 PM
|
||||
|
||||
Lunati bracket master 292 for mild 455
Hi I have a reasonably stock 455. I just picked up a st of 6x 4 heads to replace my big chamber 4x heads (unported). I typically run 14.2s with the stock 3.08 gears in my 68 lemans. Im running a stock cam as well. I have a lunati bracket master 2 cam on the shelf. Its 292/292, 230 @ .050, and 490 lift. Im just tring to pick up a little et, and gain a rougher idle. On the same token, I dont want to over cam it? If its too much cam, I might just bolt on the 6x heads with some roller rockers, and gain some compression. Any opinions greatly appreciated.
Btw i also have a performer, a performer rpm intakes, and 2200 stall converter.
__________________
1968 pontiac lemans 400. 13.16@102/8.5:1 /6x-4/lunati bm 2 cam/ 3500 stall/3.55 gears. |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode