Quote:
Originally Posted by gtofreek
Agree that that is a lot of cam for a 326. If it's mostly a stock build, you will not be happy with that. If you want something that will drive and behave nice, but have good power, I would suggest something like the Lunati VooDoo # 10510700, which is 207/213 duration at .050". This cam will idle nice and pull real strong in a stock type326 build. If you want a little more attitude, you might look at the 10510701 which is 213/219, but unless you make other mods like good exhaust and 4 barrel carb, maybe even a bit of stall converter, and gears I wouldn't go this route.
|
X 10 !!!!!!!!!!!
The Factory 068 cam is also a nice choice for a 326.
Will broaden the rpm power band with that small bore.
Elongate the pushrod holes and run 1.60 or 1.65 rockers.
12-13-2013, 11:11 AM
Threaded Mode