[Nicks67GTO]

Originally Posted by imposter

jealous i bet those will fit through the lower control arm hole let me know

Well I installed the HQ's today. I talked to ridetech and they were pretty stern that I should be mounting these through the lower A arm hole and not on top of the spacers. It could have messed with available wheel travel. I had to get the die grinder and carbide bur out and do just a hair of clean up on the SPC lower A arm and spacers. Maybe a minutes total grinding on each lower arm. The HQ's just wouldn't fit through. I probably took out less than .080 total between both sides on each arm. I really just cleaned it up and they slid right in from the bottom. Mounted up with grade 8 hardware and that was it!