08-02-2017, 01:17 PM

ta man

Ultimate Warrior

Join Date: Apr 2006

Location: Clinton,Ontario,Canada

Posts: 5,544

Quote:

Originally Posted by 71 Goatman

ta man, I noticed you are running a nice cast aluminum valley pan. Just in the process of freshening my 462 with some KRE heads, after seeing yours am thinking of getting one. Do you run a PVC with that valley pan or did you connect it somewhere else?

I used to run one ,there is a boss on the back you can drill and tap for one.It really needs a baffle for it,or just use a valve cover.I run a vacuum pump currently.
It is a nice part,best thing is you don't have to worry about bending it.I had to trim mine a little more because the heads were milled and shortblock decked.

__________________

466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2,generic one inch open spacer
373 gears 3200 Continental Convertor
best et 10.679/127.5/1.533 60ft
308 gears best et 10.76/125.64/1.5471

Last edited by ta man; 08-02-2017 at 01:50 PM.

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 03:54 AM.

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

Menu

About Us