[RAIV-Z]

Originally Posted by LPI

It is the new Pro-comp brand "shootout" intake or what was originally the PP "Hurricane" intake.

It is a low profile single plane intake which in our opinion and experience is a very good intake for a N/A engine and it is an excellent intake for a boosted engine.

The intake with the "Johnny 5" epoxy coating, with the -6 AN fuel rails, -6 AN end fittings and rail supports and the anodized billet water neck would be $895.00

We also offer the intake in a multitude of colors with a baked Cerakote finish too.

The picture shows it with the Holley HP 4150 throttle body and a set of 48 LB./HR. EV-1 style injectors, those two items would be $820.00.

We have package deals on complete intake and EFI systems as well.

The next dedicated EFI intake will be a low profile front or rear mount throttle body style based on the "LS" Hi-Ram top. We also have provisions for a dedicated air to water inter cooler that will sandwich between the top and the mid plenum base. Very similar to what is on "The Raven" the 69 twin turbo RA V Firebird. This will be for more street/strip pro-touring vehicles.

Raven Intake Pic.
Give Mark a call, he can set you up

Pardon the large image.