| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#11
03-17-2019, 12:38 PM
|
||||
|
||||
Wear on the lower bushing should only happen in one place as it's got a helical cut gear on it and the cam is trying to push it away I one direction only.
Wear all the way around without any damage to the shaft tells me it was probably pretty darned loose or the wrong size right to start with as it really can't move around in a circle like that with the cam driving it, unless of course the shaft has a pretty good bend in it someplace.........Cliff
__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran! https://cliffshighperformance.com/ 73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile), |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode