| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#10
05-27-2019, 10:56 AM
|
||||
|
||||
Edelbrock doesn't make or design camshafts. The 2157 is nothing more than the "RV" grind that's been available for at least 4 decades for just about every brand/make/type of engine out there. It's sold under at least a dozen labels, and those selling it will often change the specs ever so slightly to make it look like their own grind.
It's a decent cam in a 350CID build around 8.5 to 9 to 1 compression. Above that one can very quickly run into detonation issues, and below that engine power gets a little "soggy" down low.....Cliff
__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran! https://cliffshighperformance.com/ 73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile), |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode