| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#9
12-24-2024, 01:10 AM
|
||||
|
||||
I got to dig in on the 350 a little more. It's not as bad as I thought it might be, but it's also not as good as it could be. Compression is down substantially on a couple cylinders so it eventually needs a rebuild. As I suspected, the valve stem o-rings are toast. I'm going to go ahead and replace those in the mean time to try to stem the oil consumption while we plan for a rebuild. The valves only the o-ring on them. Just confirming the other seals (FelPro 13350) aren't used in a bone stock setup.
__________________
Ken '68 GTO - 464 - Ram Air II heads - 236/242 roller - 9.5” TSP converter - Moser 3.55 Truetrac (build thread | walk around) '74 Ventura 350 '69 AMC Javelin SST |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode