| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
||||
|
||||
|
I just acquired a '66 GTO, and I have a tire/wheel question.
But for some seemingly stupid reason, I cannot get a picture of the tire & wheel to load. So, here goes, the tires are P215/70R15 BFG white letter radial T/A's. They are mounted on a set of older American (Torque Thrust, I think) wheels. When turning, right or left, I'm getting a rub, it feels like (I had nobody to observe) the tire is briefly rubbing the edge of the front fender lip. As I turn more it ceases, then rubs again, as it returns to center. So, if the wheel has to much offset, will this cause the rub? The car has front disc brakes. I would like to keep these wheels if possible, as when looking at "American Wheels", the same wheel isnot offered. What suggestions or recommendations can Y'all make? A smaller tire? It wouldn't look as good, would it? Wish I knew the particular model. width, off-set, etc Thanks from an "ol man" ![]() Allan |
|
|