| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#5
11-13-2025, 11:42 AM
|
||||
|
||||
Finally got proper gaskets and O-Ring for a leak free install and added Butler's AN fuel line kit for the Edelbrock mechanical fuel pump to quadrajet connection. (I did have to get a different fitting to replace the quadraject filter housing though, Earl's Performance Plumbing fitting at Summit Racing, part number AT991943ERL ).
Went through warmup and finally got the tune in with idle screws out at 2 turns, initial ignition set at 14 degrees. Was able to get it to idle at 650 in drive with the A/C on and idle speed only jumped to 800 in park. https://www.youtube.com/watch?v=yewU8ixqtGo So I'm ready for some feedback if you think manifold vacuum at 12 inches is okay for this setup: 350 block with 4.25" crank for 413 cu in 6X-4 heads, Ross flat tops set at 0.0 deck height Comp XE276HR cam - 224/230 @ .050 Lift .502/510 LSA 110 Last edited by srmmmm; 11-13-2025 at 11:53 AM. |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode