[einstein]

Keep in mind the length of the swinging part of the swaybar. It's about a foot on A-bodies (which BTW also fit the 70-81 Firebird), but only about six inches on the 67-69 F-body and 68-74 Nova.

That means that a 1-1/4" with a 12" swing has a similar tension as a 1" bar with a 6" swing.

Plus, there are bigger bars if you really want them. I believe there's a 1-1/8" for the first-gen, but one inch is usually the largest you'll need.

I had a set of Herb Adams VSE bars on my 69 Firebird. One inch front and rear, with block mount on the control arm and heimjoint links. I think Adams' bars were actually made by Moroso. (I also had Adams' steel/nylon control arm bushings, rather than those crappy polyurethane.)

Addco also made a one-inch bar for a traditional loop-end for conventional links.

I'm sure there are others, check with Global West.

Glenn Uettwiller http://home.earthlink.net/~birdman8/index.html

A friend is someone who knows the song in your heart and sings it back to you when you have forgotten how it goes. --- unknown