[GTO JOHN]

Dua Judges:

This has been brought up before but is worth repeating. Check out the following thread for some great info on 69 4spd floor cutouts.

http://forums.maxperformanceinc.com/...ht=4+spd+floor

I made a drawing of my original floor and posted it in the #9 post on the above thread. By the way the edges are not perfectly smooth. It appears they used a torch or plasma cutter to cut the hole at the factory. Wouldn't want anyone "overrestoring" their car with a nice smooth cutout.

[DuaJudges]

RuffJudge and Rest:

Thank you very much for taking the time to help. I wish I would have seen the eBay item! I will pass this along to my restorer and again, thanks!

T.

[DuaJudges]

RuffJudge and Rest:

Thank you very much for taking the time to help. I wish I would have seen the eBay item! I will pass this along to my restorer and again, thanks!

T.

[DuaJudges]

GTO John, RuffJudge and Rest:

I just wanted to again say thanks to the people who go out of their way to take photographs and post them on this site for the benefit of others. I know everyone of us is busy with one thing or another and I think it is pretty cool that people take the time to assist each other. I printed the photos and the measurements and will send them to my guy.

[RUFFJUDGE]

No problem, glad to help. Good luck with it and keep us posted on your progress!


Dennis...