[Stuart]

I don't think you're going to find a kit anywhere, but it's a straightforward job to get the components from a parts car and swap them in. You'll need the power steering box, the power steering pump and hoses, and the proper mounting brackets to bolt the pump to the engine. I believe you'll need different pulleys to accomodate the extra belt for the power steering pump as well. It's a good time to replace the rag joint connection between the box and the steering column, while you're at it.

There are places that can rebuild the box or make it a faster ratio if desired, Pittsburgh 64 just posted about a new steering box he got from Lee Mfg. in the last week or two.

What disk brake setup did you go with?