[Brian jones]

Originally Posted by steve v

The 64 bellhousing does have 2 bolt holes (1/4") on the lower section where a cover or plate would bolt to it running parallel to the flywheel. The 64 bellhousing I have is missing that cover but it shouldn't be to hard to fabricate one.

If you need a bellhousing I have one available also.

Thanks Guys,


I have the correct 64 Bellhousing. I'm looking for an original cover.

The 1965 cover can be modified to fit the 64 Bellhousing by cutting off the lower horizontal portion of it and using only the vertical part to bolt to the front side of the bellhousing were the flywheel is exposed.


Thanks,

Brian

[gentile3]

you are looking for the flywheel cover not the inspection plate?

i would think you could modify any of them to work pretty easily...

tks

sam