| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
09-10-2010, 02:13 PM
|
||||
|
||||
Thanks, for the info. Does it take much force to remove the plastic elbow. Does it pop straight out or do I "wiggle" it bit to get it loose?
__________________
I don't always cross thread the bolt - but when I do I run that bitch in with an impact until it's tight! |
|
#2
09-10-2010, 02:22 PM
|
||||
|
||||
|
It takes some force.just wiggle and pull.I would also change the dex-cool antifreeze while your at it and replace with green anti freeze .Dex-cool is junk. good luck
www.3800Pro.com is a great site for 3.8 info.
__________________
 SEVEN UPS 2.0 TAKING THE THIRD DEGREE ONE STEP FURTHER 2016 1/8 MILE 7.0 @ 100 MPH 406 B&M MINI BLOWER Last edited by HO 67 BIRD; 09-10-2010 at 02:28 PM. |
|
#3
09-10-2010, 02:46 PM
|
||||
|
||||
|
Thanks again, I will give it try.
__________________
I don't always cross thread the bolt - but when I do I run that bitch in with an impact until it's tight! |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
